| 1 | Preform geometry determination for a connecting rod forging by CEL model in Abaqus? | Coautor: Ortiz A., Ramírez E.I., Ruiz O., Reyes-Ruiz C. | 2023 | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | WoS-id: 001030774100002
Scopus-id: 2-s2.0-85164806155
| 2 | 2 |
| 2 | Role of anisotropic invariants in numerically modeling soft biological tissues as transversely isotropic hyperelastic materials: A comparative study | 2ᵒ autor y autor de correspondencia: Ortiz, Armando, Castillo-Mendez, Carlos | 2022 | INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS | WoS-id: 000718324800002
Scopus-id: 2-s2.0-85118507482
| 17 | 19 |
| 3 | Numerical simulation data and FORTRAN code to compare the stress response of two transversely isotropic hyperelastic models in ABAQUS | 2ᵒ autor y autor de correspondencia: Ortiz A., Castillo-Méndez C. | 2022 | Data in Brief | WoS-id: 000787833400018
Scopus-id: 2-s2.0-85123605665
| 1 | 1 |
| 4 | Analysis of the equivalent plastic displacement influence on chip morphology during the orthogonal cutting process using CEL modeling | Coautor: Ortiz, Armando, Vargas, Mark, Ramírez E.I., Ruiz, Osvaldo, et al. | 2022 | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | WoS-id: 000841082800001
Scopus-id: 2-s2.0-85136199753
| 2 | 3 |
| 5 | Review on Ammonia as a Potential Fuel: From Synthesis to Economics | Coautor: Ortiz-Prado, A., Valera-Medina, A., Amer-Hatem, F., Azad, A. K., et al. | 2021 | ENERGY & FUELS | WoS-id: 000648878900003
Scopus-id: 2-s2.0-85103333016
| 622 | 715 |
| 6 | Effect of the Repetitive Corrugation and Straightening on the Microstructure and Mechanical Properties of a 3003 Aluminum Alloy | Coautor: Ortiz A., Reyes-Ruiz C., Figueroa C.G., González G. | 2021 | PHYSICS OF METALS AND METALLOGRAPHY | WoS-id: 000667700900010
Scopus-id: 2-s2.0-85108889956
| 3 | 3 |
| 7 | Identification of Electronic Components Susceptible to Deterioration by Atmospheric Corrosion | 2ᵒ autor y autor de correspondencia: Prado, A. Ortiz, Perez, F. Sanchez | 2020 | JOURNAL OF ELECTRONIC MATERIALS | WoS-id: 000515822800010
Scopus-id: 2-s2.0-85077717478
| 0 | 0 |
| 8 | Biomechanical behavior of bone tissue in spine instrumentation | Coautor: Ortiz-Prado A., Alpízar-Aguirre A., González-Carbonell R.A., Jacobo-Armendáriz V.H., et al. | 2020 | CIRUGIA Y CIRUJANOS | WoS-id: 000596394800007
Scopus-id: 2-s2.0-85078268477
| 1 | 2 |
| 9 | Comparative Study of Biomechanical Model of the L4-L5 Lumbar Section with Mechanical Fixation | Coautor: Ortiz-Prado, Armando, Pérez-Rivero E.O., González-Carbonell R.A., Jacobo-Armendáriz V.H. | 2020 | IFMBE Proceedings | WoS-id: 000648705800110
Scopus-id: 2-s2.0-85075688101
| 0 | 0 |
| 10 | Biomechanical Analysis of Weeding Labor in Mexican Farmers Through the Simultaneous Use of Photogrammetry and Accelerometry | 2ᵒ autor: Ortiz-Prado A., Morales-Acosta L., Jacobo-Armendáriz V.H., González-Carbonell R.A. | 2020 | IFMBE Proceedings | WoS-id: 000648705800111
Scopus-id: 2-s2.0-85075682929
| 0 | 1 |
| 11 | Parametric Study of Simulated Randomly Rough Surfaces Used in Contact Mechanics | Coautor: Ortiz Prado, Armando, Schouwenaars, Rafael, Angel Ramirez, Miguel, Gabriel Figueroa, Carlos, et al. | 2019 | Structural Integrity-Series | WoS-id: 000521731000032
Scopus-id: 2-s2.0-85085202377
| 0 | 0 |
| 12 | Critical analysis of randomly rough surfaces for contact mechanics through statistical simulation | Coautor: Ortiz A., Ramírez M.Á., Figueroa C.G., Jacobo V.H., et al. | 2019 | Lecture Notes In Mechanical Engineering | Scopus-id: 2-s2.0-85068400630
| 0 | 1 |
| 13 | Analysis and characterization of the normal gait phases of walking Warmblood horses as a tool for the diagnosis of lameness | 2ᵒ autor: Ortiz-Prado, Armando, Morales-Acosta, Lazaro, Jacobo-Armendariz, Victor H., Gonzalez-Carbonell, Raide A. | 2018 | PESQUISA VETERINARIA BRASILEIRA | WoS-id: 000435031500027
Scopus-id: 2-s2.0-85048450210
| 5 | 5 |
| 14 | Sensitivity analysis on ram speed of a direct extrusion process model using a porthole die through CEL method | Coautor: Ortiz A., Cristobal M., Ramírez E.I., Ruiz O., et al. | 2017 | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | WoS-id: 000398997800005
Scopus-id: 2-s2.0-84983449354
| 1 | 1 |
| 15 | The effect of vertical scaling on the estimation of the fractal dimension of randomly rough surfaces | Coautor y autor de correspondencia: Ortiz A., Schouwenaars R., Jacobo V.H. | 2017 | APPLIED SURFACE SCIENCE | WoS-id: 000410609400103
Scopus-id: 2-s2.0-85026802585
| 8 | 10 |
| 16 | A CT-based and mechanobiologic model for the simulation of rotation of tibia deformities during patient´s immobilization treatment | 2ᵒ autor: Ortiz-Prado A., González-Carbonell R.A., Jacobo-Armendáriz V.H., Cisneros-Hidalgo Y.A., et al. | 2017 | IFMBE Proceedings | Scopus-id: 2-s2.0-85018415755
| 0 | 1 |
| 17 | Tribological and Microstructural Characterization of Ultrafine Layers Induced by Wear in Ductile Alloys | Coautor: Ortiz A., Figueroa C., Schouwenaars R., Jacobo V., et al. | 2016 | Tribology Online | Scopus-id: 2-s2.0-84969268036
| 0 | 8 |
| 18 | Simulación computacional de tejido óseo como apoyo al sistema de salud Cubano | Coautor: Ortiz Prado A., Cisneros Hidalgo Y.A., González Carbonell R.A., Jacobo Almendariz V.H., et al. | 2016 | Revista Cubana de Investigaciones Biomedicas | Scopus-id: 2-s2.0-85012000413
| 0 | 0 |
| 19 | Possible application de la modélisation assistée par ordinateur des tissus osseux chez des enfants atteints de torsion tibiale] [Posibilidad de aplicación de la simulación computacional de tejido óseo en niños con torsión tibial | Coautor: Ortiz Prado A., Cisneros Hidalgo Y.A., González Carbonell R.A., Nápoles Padrón E., et al. | 2016 | Revista Cubana de Ortopedia y Traumatologia | Scopus-id: 2-s2.0-85019570828
| 0 | 0 |
| 20 | Critical analysis of a coaxial configuration for the characterization of adhesive wear and its application to Al and Al-Sn alloys | Coautor: Ortiz A., Figueroa C.G., Jacobo V.H., Schouwenaars R. | 2015 | TRIBOLOGY LETTERS | WoS-id: 000356539000014
Scopus-id: 2-s2.0-84929993331
| 8 | 10 |
| 21 | 3D patient-specific model of the tibia from CT for orthopedic use | 2ᵒ autor: Ortiz-Prado A., González-Carbonell R.A., Jacobo-Armendáriz V.H., Cisneros-Hidalgo Y.A., et al. | 2015 | Journal of Orthopaedics | WoS-id: 000385434900003
Scopus-id: 2-s2.0-84930189588
| 8 | 20 |
| 22 | Modelo mecanobiológico de una tibia humana para determinar su respuesta ante estímulos mecánicos externos | Coautor: Prado A.O., Hidalgo Y.A.C., Carbonell R.A.G., Almendáriz V.H.J., et al. | 2015 | Revista Cubana de Investigaciones Biomedicas | Scopus-id: 2-s2.0-84938585348
| 0 | 6 |
| 23 | Consideraciones en la definición del modelo específico al paciente de la tibia | 2ᵒ autor: Ortiz Prado A., González Carbonell R.A., Jacobo Armendáriz V.H., Cisneros Hidalgo Y.A., et al. | 2015 | Revista Cubana de Investigaciones Biomedicas | Scopus-id: 2-s2.0-84951759123
| 0 | 4 |
| 24 | Algoritmo para predecir tensiones con técnicas de inteligencia artificial en una tibia humana | Coautor: Ortiz Prado A., Cisneros Hidalgo Y.A., González Carbonell R.A., Jacobo Almendáriz V.H. | 2015 | Revista Cubana de Investigaciones Biomedicas | Scopus-id: 2-s2.0-84958525399
| 0 | 2 |
| 25 | Synthesis, characterization and cold workability of cast copper-magnesium-tin alloys | Coautor: Prado, AO, Benard, AEB, Hernandez, DM, Reyes, JGG, et al. | 2014 | METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | WoS-id: 000331094100006
Scopus-id: 2-s2.0-84895924409
| 7 | 6 |
| 26 | Microstructures of tribologically modified surface layers in two-phase alloys | Coautor: Ortiz A., Figueroa C.G., Ortega I., Jacobo V.H., et al. | 2014 | IOP Conference Series-Materials Science and Engineering | WoS-id: 000347246200019
Scopus-id: 2-s2.0-84906337467
| 11 | 11 |
| 27 | Multiple dislocation pile-ups in small grains at small strains: implications for the Hall-Petch relationship and backstress screening | Coautor y autor de correspondencia: Ortiz A., Schouwenaars R., Jacobo V.H. | 2014 | IOP Conference Series-Materials Science and Engineering | WoS-id: 000347246200133
Scopus-id: 2-s2.0-84906337560
| 0 | 1 |
| 28 | Bone Remodeling Simulation of Subject-Specific Model of Tibia under Torque | 2ᵒ autor: Ortiz-Prado A., González-Carbonell R.A., Cisneros-Hidalgo Y.A., Alpizar-Aguirre A. | 2014 | IFMBE Proceedings | WoS-id: 000363767200078
Scopus-id: 2-s2.0-84925272582
| 2 | 7 |
| 29 | Towards new formulations for journal bearing alloys | Coautor: Ortiz, A, Bravo, AE, Duran, HA, Jacobo, VH, et al. | 2013 | Wear | WoS-id: 000322682800080
Scopus-id: 2-s2.0-84879138941
| 19 | 23 |
| 30 | Spark plug failure due to a combination of strong magnetic fields and undesirable fuel additives | 1ᵉʳ autor: Ortiz A., Romero J.L., Cueva I., Jacobo V.H., et al. | 2013 | Case Studies in Engineering Failure Analysis | Scopus-id: 2-s2.0-84881343938
| 0 | 8 |
| 31 | Fracture of thin cast slabs of Al-Sn alloys during cold rolling | Coautor: Ortiz, A, Schouwenaars, R, Ramirez, EI, Romero, J, et al. | 2012 | ENGINEERING FAILURE ANALYSIS | WoS-id: 000308770000018
Scopus-id: 2-s2.0-84862133700
| 5 | 7 |
| 32 | Microstructure, texture and recrystallisation mechanisms of an Al-20%Sn deformation processed metal-metal composite | Coautor: Ortiz A., Schouwenaars R., Duran H.A., Jacobo V.H. | 2012 | Materials Science Forum | WoS-id: 000309430800085
Scopus-id: 2-s2.0-84860776331
| 3 | 4 |
| 33 | Analysis of the asymmetric roll bonding process by means of the slab method | Coautor y autor de correspondencia: Ortiz A., Schouwenaars R., Jacobo V.H. | 2012 | Materials Science Forum | WoS-id: 000309487300224
Scopus-id: 2-s2.0-84855644134
| 0 | 0 |
| 34 | Probing the constitutive behaviour of an Al-Sn-Si alloy by tensile testing and instrumented indentation | Coautor: Ortiz A., Schouwenaars R., Durán H.A., Bravo A., et al. | 2012 | Wit Transcations On The Built Environment | Scopus-id: 2-s2.0-84865797344
| 0 | 1 |
| 35 | Effects of architecture, density and connectivity on the properties of trabecular bone: A two-dimensional, Voronoi cell based model study | Coautor: Ortiz A., Ruiz O., Schouwenaars R., Ramírez E.I., et al. | 2011 | AIP Conference Proceedings | WoS-id: 000301985200008
Scopus-id: 2-s2.0-81855161527
| 4 | 5 |
| 36 | Polynomial vs. mechanism-based response surface analysis of the thermomechanical treatment of Al-Sn alloys | Coautor: Ortiz A., Schouwenaars R., Cortéz H.A., Jacobo V.H. | 2010 | Materials Science Forum | WoS-id: 000281043800051
Scopus-id: 2-s2.0-75849150793
| 3 | 3 |
| 37 | Non-equilibrium solidification in Cu-Mg-Sn alloys for tribological applications | Coautor: Ortiz A., Bravo A., Schouwenaars R., Jacobo V.H. | 2010 | Materials Science Forum | WoS-id: 000285374600341
Scopus-id: 2-s2.0-77955474350
| 2 | 3 |
| 38 | Microstructure, properties and annealing behavior of an ARB-processed Al20%Sn alloy | Coautor: Ortiz A., Bravo A., Schouwenaars R., Jacobo V.H. | 2010 | Advanced Materials Research | WoS-id: 000307888500011
Scopus-id: 2-s2.0-75749128659
| 0 | 0 |
| 39 | Analysis of the architecture and mechanical properties of cancellous bone using 2D voronoi cell based models | Coautor: Ortiz A., Ruiz O., Schouwenaars R., Ramírez E.I., et al. | 2010 | Wce 2010 - World Congress On Engineering 2010 | Scopus-id: 2-s2.0-79959855922
| 0 | 9 |
| 40 | Transition from normal to severe wear in PCD during high-speed cutting of a ductile material | Coautor y autor de correspondencia: Ortiz, A, Schouwenaars, R, Jacobo, VH | 2009 | INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS | WoS-id: 000264261900028
Scopus-id: 2-s2.0-59849124524
| 7 | 8 |
| 41 | Formation of bubbles in viscous fluids contained in cones and cylinders | 1ᵉʳ autor: Ortiz, A, Lopez-Villa, A, Medina, A, Higuera, FJ | 2009 | REVISTA MEXICANA DE FISICA | WoS-id: 000267494600003
| 0 | 0 |
| 42 | Quantitative comparison of the microstructural quality of two classes of commercial soft triboalloys | Coautor y autor de correspondencia: Ortiz, A, Schouwenaarsy, R, Jacobo, VH | 2008 | MATERIALS CHARACTERIZATION | WoS-id: 000253268600017
Scopus-id: 2-s2.0-38349084990
| 12 | 12 |
| 43 | Slow crack growth and failure induced by manufacturing defects in HDPE-tubes | Coautor: Ortiz A., Schouwenaars R., Jacobo V.H., Ramos E. | 2007 | ENGINEERING FAILURE ANALYSIS | WoS-id: 000246457900015
Scopus-id: 2-s2.0-34147182698
| 42 | 50 |
| 44 | Hybrid expert system for the failure analysis of mechanical elements | 2ᵒ autor: Ortiz A., Jacobo V.H., Cerrud Y., Schouwenaars R. | 2007 | ENGINEERING FAILURE ANALYSIS | WoS-id: 000248233300003
Scopus-id: 2-s2.0-34250717526
| 13 | 19 |
| 45 | Microstructural aspects of wear in soft tribological alloys | Coautor y autor de correspondencia: Ortiz A., Schouwenaars R., Jacobo V.H. | 2007 | Wear | WoS-id: 000249950600092
Scopus-id: 2-s2.0-34848836044
| 89 | 93 |
| 46 | Microstructures of rapidly solidified Pb-Sb-Sn-alloys | Coautor: Ortiz A., Schouwenaars R., Romero J.I., Jacobo V.H. | 2007 | Advanced Materials Research | Scopus-id: 2-s2.0-34848865508
| 0 | 3 |
| 47 | Tailoring the mechanical properties of Al-Sn-alloys for tribological applications | Coautor: Ortiz A., Schouwenaars R., Torres J.A., Jacobo V.H. | 2007 | Materials Science Forum | Scopus-id: 2-s2.0-38349112086
| 0 | 11 |
| 48 | Physicochemical aspects of novel surfactantless, self-templated mesoporous SnO2 thin films | Coautor: Ortiz A., Velásquez C., Rojas F., Esparza J.M., et al. | 2006 | JOURNAL OF PHYSICAL CHEMISTRY B | WoS-id: 000238284600034
Scopus-id: 2-s2.0-33745792791
| 18 | 19 |
| 49 | Finite element simulation of microstresses in a traditional FGM: The case of soft tribo-alloys | Coautor: Ortiz A., Schouwenaars R., Jacobo V.H., Cerrud S. | 2005 | Materials Science Forum | Scopus-id: 2-s2.0-34848821079
| 0 | 5 |
| 50 | Tribolayer formation as a functionally self-grading process in soft anti-friction alloys | Coautor: Ortiz A., Schouwenaars R., Jacobo V.H., Cerrud S. | 2005 | Materials Science Forum | Scopus-id: 2-s2.0-34848835311
| 0 | 5 |
| 51 | Particle evolution and grain growth during annealing of a complex multiphase Al-Sn triboalloy | Coautor: Ortiz A., Cerrud S.M., Schouwenaars R., Ramírez E.I. | 2004 | Materials Science Forum | Scopus-id: 2-s2.0-17144379393
| 0 | 2 |
| 52 | The obtention of homogeneous microstructures in Al-Sn-based tribological alloys | Coautor: Ortiz A., Schouwenaars R., Jacobo V.H., Cerrud S.M. | 2003 | Materials Science Forum | Scopus-id: 2-s2.0-0038002437
| 0 | 8 |
| 53 | Design, construction and testing of a system for accelerated simulation of damage by atmospheric corrosion on electronic equipment | Coautor: Ortiz Prado A., Cerrud Sanchez S.M., Jacobo Armendáriz V.H., Schouwenaars R. | 2003 | CORROS REV | Scopus-id: 2-s2.0-0347760011
| 0 | 1 |
| 54 | Scanning electron microscopy observation of the substructural evolution of aluminium alloys during cold rolling and partial annealing | Coautor y autor de correspondencia: Ortiz A., Schouwenaars R., Cerrud S. | 2002 | Scanning | WoS-id: 000177050300008
Scopus-id: 2-s2.0-0036326945
| 4 | 5 |
| 55 | Mechanical analysis of fracture in an automotive radiator head produced from a nylon-glass fibre composite | Coautor y autor de correspondencia: Ortiz A., Schouwenaars R., Cerrud S. | 2002 | COMPOS PART A-APPL S | Scopus-id: 2-s2.0-0036532945
| 1 | 3 |
| 56 | Analysis of the frequency, causes and consequences of a common quality problem in the babbit coating of trimetal journal bearings | Coautor y autor de correspondencia: Ortiz A., Schouwenaars R., Cerrud S. | 2001 | Sae Technical Papers | Scopus-id: 2-s2.0-33845405213
| 0 | 2 |
ID's SCOPUS 
ORCID's 