| 1 | Invertebrate fauna of the Albian-Lower Cenomanian deposits in the Fars and Isfahan provinces (Firuzabad and Fasakhod sections), Zagros Basin, Central Iran | 2ᵒ autor: Bahrami A., Sedghi B., Yazdi M., Vega F.J. | 2023 | BOLETIN DE LA SOCIEDAD GEOLOGICA MEXICANA | WoS-id: 001123952900001
Scopus-id: 2-s2.0-85173017728
| 0 | 0 |
| 2 | Effect of Powder ALD Interface Modification on the Thermoelectric Performance of Bismuth | 2ᵒ autor: Bahrami A., He S., Zhang X., Martínez I.G., et al. | 2022 | Advanced Materials Technologies | WoS-id: 000712863400001
Scopus-id: 2-s2.0-85118384403
| 31 | 28 |
| 3 | Low-Temperature Atomic Layer Deposition of High-k SbOx for Thin Film Transistors | 2ᵒ autor: Bahrami A., Yang J., Ding X., Zhao P., et al. | 2022 | ADVANCED ELECTRONIC MATERIALS | WoS-id: 000764074300001
Scopus-id: 2-s2.0-85125603338
| 32 | 16 |
| 4 | Characteristics of ALD-ZnO Thin Film Transistor Using H2O and H2O2 as Oxygen Sources | 2ᵒ autor: Bahrami A., Yang J., Ding X., Lehmann S., et al. | 2022 | ADVANCED MATERIALS INTERFACES | WoS-id: 000779887800001
Scopus-id: 2-s2.0-85127644114
| 33 | 35 |
| 5 | Structural and Electrochemical Properties of Layered P2-Na0.8 Co0.8 Ti0.2 O2 Cathode in Sodium-Ion Batteries | Coautor: Bahrami A., Pohle B., Gorbunov M.V., Lu Q., et al. | 2022 | Energies | WoS-id: 000795277500001
Scopus-id: 2-s2.0-85130148014
| 6 | 6 |
| 6 | Improving the thermoelectric performance of ZrNi(In,Sb)-based double half-Heusler compounds | 2ᵒ autor: Bahrami A., He S., Ying P., Giebeler L., et al. | 2022 | JOURNAL OF MATERIALS CHEMISTRY A | WoS-id: 000811030400001
Scopus-id: 2-s2.0-85132417697
| 26 | 27 |
| 7 | Surface Modification of Bismuth by ALD of Antimony Oxide for Suppressing Lattice Thermal Conductivity | Coautor: Bahrami A., He S., Yang J., Zhang X., et al. | 2022 | Acs Applied Energy Materials | WoS-id: 000812972800001
Scopus-id: 2-s2.0-85129078263
| 15 | 15 |
| 8 | Current State-of-the-Art in the Interface/Surface Modification of Thermoelectric Materials | Coautor: Bahrami A., He S., Lehmann S., Nielsch K. | 2021 | ADVANCED ENERGY MATERIALS | WoS-id: 000685448100001
Scopus-id: 2-s2.0-85112482201
| 74 | 77 |
| 9 | Reduced Lattice Thermal Conductivity for Half-Heusler ZrNiSn through Cryogenic Mechanical Alloying | 1ᵉʳ autor: Bahrami A., Ying P., Wolff U., Rodríguez N.P., et al. | 2021 | ACS APPLIED MATERIALS & INTERFACES | WoS-id: 000687172000062
Scopus-id: 2-s2.0-85113777472
| 35 | 39 |
| 10 | Progress and challenges in using sustainable carbon anodes in rechargeable metal-ion batteries | 2ᵒ autor: Bahrami A., Soltani N., Giebeler L., Gemming T., et al. | 2021 | PROG ENERG COMBUST | WoS-id: 000697412700002
Scopus-id: 2-s2.0-85111194008
| 77 | 87 |
| 11 | High-Performance n-Type Ge-Free Silicon Thermoelectric Material from Silicon Waste | Coautor: Bahrami A., Liu Z., Zhang Q., Wolff U., et al. | 2021 | ACS APPLIED MATERIALS & INTERFACES | WoS-id: 000709458200057
Scopus-id: 2-s2.0-85117293491
| 6 | 7 |
| 12 | Waste Recycling in Thermoelectric Materials | 1ᵉʳ autor: Bahrami A., Schierning G., Nielsch K. | 2020 | ADVANCED ENERGY MATERIALS | WoS-id: 000521614600001
Scopus-id: 2-s2.0-85082333391
| 74 | 80 |
| 13 | Improving the Interfacial Reaction Between Cristobalite Silica from Rice Husk and Al?Mg?Si by CVD-Si3N4 Deposition | 2ᵒ autor: Bahrami A., Soltani N., Pech-Canul M.I., Gonzalez L.A. | 2020 | WASTE AND BIOMASS VALORIZATION | WoS-id: 000538735600053
Scopus-id: 2-s2.0-85074468161
| 19 | 18 |
| 14 | Surpassing Cu?Ta Miscibility Barriers Using a High-Current Pulsed Arc | 2ᵒ autor: Bahrami A., Mendoza-Pérez R., Calderón-Olvera R.M., Romero-Ibarra J.E., et al. | 2020 | ADVANCED MATERIALS INTERFACES | WoS-id: 000572939300001
Scopus-id: 2-s2.0-85091483449
| 1 | 1 |
| 15 | Wear resistance of graphenic-nickel composite coating on austenitic stainless steel | Coautor: Bahrami A., Hdz-García H.M., Muñoz-Arroyo R., Alvarez-Vera M., et al. | 2020 | MATERIALS LETTERS | WoS-id: 000581134200062
Scopus-id: 2-s2.0-85092214881
| 24 | 23 |
| 16 | Crustacea (Isopoda, Anomura, Brachyura) from the Cretaceous of Soh area (NW Isfahan) Central Iran | 1ᵉʳ autor: Bahrami A., Yazdi M., González-León O., De Lourdes Serrano-Sánchez M., et al. | 2020 | BOLETIN DE LA SOCIEDAD GEOLOGICA MEXICANA | WoS-id: 000583901300009
Scopus-id: 2-s2.0-85088111588
| 1 | 2 |
| 17 | Structural changes in NiO-Ce 0.8 Sm 0.2 O 2-x anode under reducing atmosphere | Coautor: Bahrami, Amin, Soltani, Niloofar, Arcos L.H., Carvayar J.C. | 2019 | MATERIALS CHARACTERIZATION | WoS-id: 000462420900002
Scopus-id: 2-s2.0-85061137216
| 2 | 4 |
| 18 | Mechanical properties and microstructural stability of CuTa/Cu composite coatings | 1ᵉʳ autor: Bahrami, Amin, Onofre Carrasco C.F., Cardona, Arturo Delgado, Huminiuc, Teodor, et al. | 2019 | SURFACE & COATINGS TECHNOLOGY | WoS-id: 000463302800004
Scopus-id: 2-s2.0-85062289756
| 37 | 38 |
| 19 | Structure, mechanical properties and corrosion resistance of amorphous Ti-Cr-O coatings | 1ᵉʳ autor: Bahrami, Amin, Delgado, Arturo, Onofre, Cesar, Muhl, Stephen, et al. | 2019 | SURFACE & COATINGS TECHNOLOGY | WoS-id: 000486360000069
Scopus-id: 2-s2.0-85067878066
| 42 | 44 |
| 20 | Multipass and reciprocating microwear study of TiN based films | Coautor: Bahrami, A., Moron, R. C., Rodriguez-Castro, G. A., Melo-Maximo, D. V., et al. | 2019 | SURFACE & COATINGS TECHNOLOGY | WoS-id: 000488409900076
Scopus-id: 2-s2.0-85070497455
| 21 | 21 |
| 21 | Bilayer graded Al/B4C/rice husk ash composite: Wettability behavior, thermo-mechanical, and electrical properties | 1ᵉʳ autor: Bahrami, Amin, Soltani, Niloofar, Pech-Canul, Martin I., Soltani, Shaghayegh, et al. | 2018 | JOURNAL OF COMPOSITE MATERIALS | WoS-id: 000450347700004
Scopus-id: 2-s2.0-85045420317
| 28 | 33 |
| 22 | Tailoring microstructure and properties of bilayer-graded Al/B4C/MgAl2O4composites by single-stage pressureless infiltration | 1ᵉʳ autor: Bahrami A., Pech-Canul M.I., Soltani N., Gutiérrez C.A., et al. | 2017 | JOURNAL OF ALLOYS AND COMPOUNDS | WoS-id: 000390622900055
Scopus-id: 2-s2.0-84991236420
| 35 | 41 |
| 23 | Eco-fabrication of hierarchical porous silica monoliths by ice-templating of rice husk ash | 1ᵉʳ autor: Bahrami A., Simon U., Soltani N., Zavareh S., et al. | 2017 | GREEN CHEMISTRY | WoS-id: 000391728900021
Scopus-id: 2-s2.0-85009727790
| 66 | 77 |
| 24 | Development of metal-matrix composites from industrial/agricultural waste materials and their derivatives | 1ᵉʳ autor: Bahrami A., Soltani N., Pech-Canul M.I., Gutiérrez C.A. | 2016 | CRITICAL REVIEWS IN ENVIRONMENTAL SCIENCE AND TECHNOLOGY | WoS-id: 000365683800003
Scopus-id: 2-s2.0-84949092928
| 146 | 197 |
| 25 | Mechanism and Parameters Controlling the Decomposition Kinetics of Na2SiF6 Powder to SiF4 | Coautor: Bahrami A., Soltani N., Pech-Canul M.I., González L.A. | 2016 | INTERNATIONAL JOURNAL OF CHEMICAL KINETICS | WoS-id: 000375084700004
Scopus-id: 2-s2.0-84964645628
| 9 | 10 |
| 26 | Tribological characterization of Al7075-graphite composites fabricated by mechanical alloying and hot extrusion | Coautor: Bahrami A., Deaquino-Lara R., Soltani N., Gutiérrez-Castañeda E., et al. | 2015 | MATERIALS & DESIGN | WoS-id: 000346852100025
Scopus-id: 2-s2.0-84921472238
| 118 | 134 |
| 27 | Review on the physicochemical treatments of rice husk for production of advanced materials | 2ᵒ autor: Bahrami A., Soltani N., Pech-Canul M.I., González L.A. | 2015 | CHEMICAL ENGINEERING JOURNAL | WoS-id: 000350191800099
Scopus-id: 2-s2.0-84920093576
| 433 | 523 |
| 28 | Effect of rice-husk ash on properties of laminated and functionally graded Al/SiC composites by one-step pressureless infiltration | 1ᵉʳ autor: Bahrami A., Pech-Canul M.I., Gutierrez C.A., Soltani N. | 2015 | JOURNAL OF ALLOYS AND COMPOUNDS | WoS-id: 000357143900040
Scopus-id: 2-s2.0-84929172770
| 63 | 76 |
| 29 | Effect of sintering temperature on tribological behavior of Ce-TZP/Al2O3-aluminum nanocomposite | 1ᵉʳ autor: Bahrami A., Soltani N., Pech-Canul M.I. | 2015 | JOURNAL OF COMPOSITE MATERIALS | WoS-id: 000363460200004
Scopus-id: 2-s2.0-84945143915
| 23 | 25 |
| 30 | Wetting and reaction characteristics of crystalline and amorphous SiO2 derived rice-husk ash and SiO2/SiC substrates with Al-Si-Mg alloys | 1ᵉʳ autor: Bahrami A., Pech-Canul M.I., Gutiérrez C.A., Soltani N. | 2015 | APPLIED SURFACE SCIENCE | WoS-id: 000366216900144
Scopus-id: 2-s2.0-84949525511
| 50 | 59 |
| 31 | Microstructure and properties of bilayer-graded Al-matrix composites by one-step pressureless infiltration of B4C/rice-husk ash preforms | 1ᵉʳ autor: Bahrami A., Pech-Canul M.I., Gutiérrez C.A., Soltani N. | 2015 | Mrs Advances | Scopus-id: 2-s2.0-85100445127
| 0 | 0 |
| 32 | Effect of hot extrusion on wear properties of Al-15wt.% Mg2Si in situ metal matrix composites | Coautor: Bahrami A., Soltani N., Jafari Nodooshan H.R., Pech-Canul M.I., et al. | 2014 | MATERIALS & DESIGN | WoS-id: 000326805500096
Scopus-id: 2-s2.0-84882777243
| 118 | 133 |
| 33 | Mechanical and tribological characterization of Al-Mg2Si composites after yttrium addition and heat treatment | Coautor: Bahrami A., Jafari Nodooshan H.R., Liu W., Wu G., et al. | 2014 | JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | WoS-id: 000333259400004
Scopus-id: 2-s2.0-84898780933
| 46 | 52 |
| 34 | Manufacturing wear-resistant 10ce-tzp/al2o3 nanoparticle aluminum composite by powder metallurgy processing | Coautor y autor de correspondencia: Bahrami A., Soltani N., Sadrnezhaad S.K. | 2014 | MATERIALS AND MANUFACTURING PROCESSES | WoS-id: 000342065100015
Scopus-id: 2-s2.0-84987814925
| 53 | 52 |
| 35 | Effect of 10Ce-TZP/Al2O3 nanocomposite particle amount and sintering temperature on the microstructure and mechanical properties of Al/(10Ce-TZP/Al2O3) nanocomposites | Coautor y autor de correspondencia: Bahrami A., Soltani N., Pech-Canul M.I. | 2013 | MATERIALS & DESIGN | WoS-id: 000320615300013
Scopus-id: 2-s2.0-84875785005
| 36 | 43 |
| 36 | The effect of Ti on mechanical properties of extruded in-situ Al-15 pct Mg2Si composite | 2ᵒ autor: Bahrami A., Soltani N., Pech-Canul M.I. | 2013 | METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | WoS-id: 000322321600036
Scopus-id: 2-s2.0-84881109730
| 48 | 54 |
| 37 | Erratum: The effect of Ti on mechanical properties of extruded in-situ Al-15 pct Mg2Si composite (Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 44:9 (4366-4373) DOI: 10.1007/s11661-013-1747-2) | 2ᵒ autor: Bahrami A., Soltani N., Pech-Canul M.I. | 2013 | METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | WoS-id: 000323666000049
Scopus-id: 2-s2.0-84883455921
| 0 | 2 |
| 38 | The influence of Li on the tensile properties of extruded in situ Al-15%Mg 2Si composite | 2ᵒ autor: Bahrami A., Razaghian A., Emamy M. | 2012 | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | WoS-id: 000301160100047
Scopus-id: 2-s2.0-83855161658
| 40 | 51 |
| 39 | The effect of Zr on the microstructure and tensile properties of hot-extruded Al-Mg2Si composite | 1ᵉʳ autor: Bahrami A., Razaghian A., Emamy M., Khorshidi R. | 2012 | MATERIALS & DESIGN | Scopus-id: 2-s2.0-84855369183
| 0 | 68 |
| 40 | The simultaneous effect of extrusion and T6 treatment on the mechanical properties of Al-15wt.%Mg2Si composite | 2ᵒ autor: Bahrami A., Soltani N., Moghimi F.M., Pech-Canul M.I., et al. | 2012 | HTM - Journal of Heat Treatment and Materials | Scopus-id: 2-s2.0-84875932915
| 0 | 10 |
| 41 | The influence of yttrium rich intermetallic phases and heat treatment on the microstructure, hardness and wear properties of AI-15%M2Si composite | Coautor: Bahrami A., Jafari Nodooshan H.R., Emamy M., Nemati N. | 2011 | Key Engineering Materials | WoS-id: 000293146200201
Scopus-id: 2-s2.0-79952918472
| 2 | 1 |
| 42 | Microstructure and tensile properties of AI-15wt%Mg2Si composite after hot extrusion and heat treatment | 1ᵉʳ autor: Bahrami A., Razaghian A., Emamy M., Jafari H.R., et al. | 2011 | Key Engineering Materials | WoS-id: 000293146200202
Scopus-id: 2-s2.0-79952940543
| 26 | 37 |
ID's SCOPUS