| 1 | Effect of Ag and Cu Content on the Properties of Zn-Ag-Cu-0.05Mg Alloys | Coautor: González-Rivera C., Jara-Chávez G., Amaro-Villeda A., Campillo-Illanes B., et al. | 2024 | METALS | WoS-id: 001277201000001
Scopus-id: 2-s2.0-85199621583
| 1 | 1 |
| 2 | Power characteristics and mass transfer of rotor injectors in a water physical model of an aluminum degassing ladle | 2ᵒ autor: Gonzalez-Rivera, Carlos, Posadas-Navarro, David Israel, Ramirez-Argaez, Marco Aurelio, Ascanio, Gabriel | 2023 | CHEMICAL ENGINEERING RESEARCH & DESIGN | WoS-id: 000925423800001
Scopus-id: 2-s2.0-85147222803
| 2 | 3 |
| 3 | Analysis of the Effect of Gas Injection System on the Heating Rate of a Gas Stirred Steel Ladle Assisted by Physical Modeling and PIV-PLIF Measurements | Coautor: González-Rivera C., Jardón-Pérez L.E., Conejo A.N., Amaro-Villeda A.M., et al. | 2023 | ISIJ INTERNATIONAL | WoS-id: 000947942600010
Scopus-id: 2-s2.0-85150410305
| 5 | 5 |
| 4 | Estimation of Uniform Risk Spectra Suitable for the Seismic Design of Structures | Coautor: Gonzalez, Carlos, Buendia, Luis, Niño M., Reinoso, Eduardo | 2023 | Buildings | WoS-id: 001071460200001
Scopus-id: 2-s2.0-85172765156
| 0 | 0 |
| 5 | Optimizing the Performance of a Dual-Injection Gas-Stirred Ladle Using Physical Modeling | 1ᵉʳ autor: González-Rivera C., Ramirez-Argáez M.A., Amaro-Villeda A., Trápaga-Martínez G., et al. | 2022 | STEEL RESEARCH INTERNATIONAL | WoS-id: 000760099900001
Scopus-id: 2-s2.0-85125086752
| 6 | 6 |
| 6 | Immunonutrition for the acute treatment of MELAS syndrome | 2ᵒ autor: González-Rivera C., Pérez-Cruz E., Valencia-Olvera L.D.C.G. | 2022 | ENDOCRINOLOGIA DIABETES Y NUTRICION | WoS-id: 000778007400008
Scopus-id: 2-s2.0-85108952645
| 1 | 1 |
| 7 | Experimental Study of Mass Transfer Mechanisms for Solute Mixing in a Gas-Stirred Ladle Using the Particle Image Velocimetry and Planar Laser-Induced Fluorescence Techniques | 2ᵒ autor: Gonzalez-Rivera, Carlos, Jardon-Perez, Luis E., Trapaga-Martinez, Gerardo, Amaro-Villeda, Adrian, et al. | 2021 | STEEL RESEARCH INTERNATIONAL | WoS-id: 000678838900001
Scopus-id: 2-s2.0-85111159601
| 9 | 9 |
| 8 | Determination of the latent heat of fusion and solid fraction evolution of metals and alloys by an improved cooling curve analysis method | 1ᵉʳ autor: Gonzalez-Rivera, Carlos, Harrup, Anthony, Aguilar, Carla, Amaro-Villeda, Adrian M., et al. | 2020 | Journal Of Thermal Analysis And Calorimetry | WoS-id: 000493684300019
Scopus-id: 2-s2.0-85074810920
| 2 | 2 |
| 9 | Utilization of the Planar Laser-Induced Fluorescence Technique (PLIF) to Measure Temperature Fields in a Gas-Stirred Ladle | Coautor: González-Rivera C., Jardón-Pérez L.E., Amaro-Villeda A.M., Trápaga-Martínez G., et al. | 2020 | METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE | WoS-id: 000563166400002
Scopus-id: 2-s2.0-85089864402
| 11 | 12 |
| 10 | Numerical modeling of equal and differentiated gas injection in ladles: Effect on mixing time and slag eye | 2ᵒ autor: González-Rivera C., Jardón-Pérez L.E., Ramirez-Argaez M.A., Dutta A. | 2020 | Processes | WoS-id: 000564810300001
Scopus-id: 2-s2.0-85089843033
| 16 | 19 |
| 11 | Alternative system to measure hydrogen content in molten aluminium using an electrochemical sensor | Coautor: Gonzalez-Rivera, Carlos, Juarez-Hernandez, Arturo, Trapaga-Martinez, Gerardo, Luis Camacho-Martinez, Jose, et al. | 2020 | INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES | WoS-id: 000616046000009
Scopus-id: 2-s2.0-85101081202
| 0 | 0 |
| 12 | A Novel Multiphase Methodology Simulating Three Phase Flows in a Steel Ladle | Coautor: Gonzalez-Rivera, C., Ramirez-Argaez, Marco A., Dutta, Abhishek, Amaro-Villeda, A., et al. | 2019 | Processes | WoS-id: 000464443100002
Scopus-id: 2-s2.0-85066496463
| 9 | 10 |
| 13 | Experimental measurements of bubble size distributions in a water model and its influence on the aluminum kinetics degassing | Coautor: González-Rivera C., Mancilla E., Cruz-Méndez W., Aurelio Ramirez-Argaez, Marco, et al. | 2019 | CANADIAN JOURNAL OF CHEMICAL ENGINEERING | WoS-id: 000468474400049
Scopus-id: 2-s2.0-85061804160
| 9 | 10 |
| 14 | Effect of differentiated injection ratio, gas flow rate, and slag thickness on mixing time and open eye area in gas-stirred ladle assisted by physical modeling | Coautor: González-Rivera C., Jardón-Pérez L.E., González-Morales D.R., Trápaga G., et al. | 2019 | METALS | WoS-id: 000478818700073
Scopus-id: 2-s2.0-85066740616
| 18 | 18 |
| 15 | Introducing the Planar Laser-Induced Fluorescence Technique (PLIF) to Measure Mixing Time in Gas-Stirred Ladles | Coautor: Gonzalez-Rivera, Carlos, Jardon-Perez, Luis E., Amaro-Villeda, Adrian, Trapaga, Gerardo, et al. | 2019 | METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE | WoS-id: 000486025000006
Scopus-id: 2-s2.0-85066762087
| 20 | 23 |
| 16 | Optimizing gas stirred ladles by physical modeling and PIV measurements | Coautor: González-Rivera C., Jardón Pérez L.E., Amaro-Villeda A., Conejo A.N., et al. | 2018 | MATERIALS AND MANUFACTURING PROCESSES | WoS-id: 000425442900012
Scopus-id: 2-s2.0-85034263258
| 26 | 26 |
| 17 | Comparison of the hydrodynamic performance of rotor-injector devices in a water physical model of an aluminum degassing ladle | Coautor: González-Rivera, C., Mancilla, E., Cruz-Méndez, W., Garduño, I.E., et al. | 2017 | CHEMICAL ENGINEERING RESEARCH & DESIGN | WoS-id: 000394397200016
Scopus-id: 2-s2.0-85008882782
| 25 | 28 |
| 18 | Effect of the Impeller Design on Degasification Kinetics Using the Impeller Injector Technique Assisted by Mathematical Modeling | Coautor: González-Rivera C., Abreu-López D., Amaro-Villeda A., Acosta-González F.A., et al. | 2017 | METALS | WoS-id: 000404051600026
Scopus-id: 2-s2.0-85018478496
| 17 | 21 |
| 19 | Modeling of metal-slag mass and momentum exchanges in gas-stirred ladles | 2ᵒ autor y autor de correspondencia: Gonzalez-Rivera, Carlos, Ramirez-Argaez, Marco | 2017 | Minerals Metals & Materials Series | WoS-id: 000405307700076
Scopus-id: 2-s2.0-85042431466
| 2 | 2 |
| 20 | Design of a rotor for aluminum degassing assisted by physical and mathematical modeling | Coautor y autor de correspondencia: Gonzalez Rivera, C., Ramirez-Argaez, M., Abreu Lopez, D. | 2017 | Mrs Advances | WoS-id: 000427708700001
Scopus-id: 2-s2.0-85044214663
| 0 | 0 |
| 21 | Physical and mathematical modeling of metal-slag exchanges in gas-stirred ladles | Coautor: Gonzalez-Rivera, C., Jardon-Perez, Luis E., Lopez-Gutierrez, A., Vazquez, Alfredo, et al. | 2017 | Mrs Advances | WoS-id: 000427708700009
Scopus-id: 2-s2.0-85044224674
| 2 | 2 |
| 22 | Impeller design assisted by physical modeling and pilot plant trials | Coautor: Gonzalez-Rivera, C., Hernandez-Hernandez, M., Camacho-Martinez, J. L., Ramirez-Argaez, M. A. | 2016 | JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | WoS-id: 000379559200001
Scopus-id: 2-s2.0-84966318474
| 32 | 33 |
| 23 | Experimental and theoretical study on melting kinetics of spherical aluminum particles in liquid aluminum | Coautor y autor de correspondencia: González-Rivera C., Ramírez-Argaez M., Jardón E. | 2016 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-84994667673
| 0 | 0 |
| 24 | Effect of Process Variables on Kinetics and Gas Consumption in Rotor-Degassing Assisted by Physical and Mathematical Modeling | Coautor: GonzalezRivera, C, HernandezHernandez, M, CruzMendez, W, RamirezArgaez, MA | 2015 | MATERIALS AND MANUFACTURING PROCESSES | WoS-id: 000346828700013
Scopus-id: 2-s2.0-84919708825
| 11 | 11 |
| 25 | Experimental Determination of the Grain Growth Kinetics during Solidification of Eutectic Al-Ni Alloy using a Simplified Mathematical Procedure | 1ᵉʳ autor: Gonzalez-Rivera C., Morua M., Ramirez-Argaez M. | 2015 | AIP Conference Proceedings | WoS-id: 000355339706005
Scopus-id: 2-s2.0-84939649231
| 0 | 0 |
| 26 | Experimental and theoretical study on melting kinetics of spherical aluminum particles in liquid aluminum | Coautor: González-Rivera C., Ramírez-Argáez M., Jardón E., Conejo A.N. | 2015 | AIP Conference Proceedings | WoS-id: 000355339706032
Scopus-id: 2-s2.0-84939648476
| 0 | 0 |
| 27 | Determination of the kinetics of grain growth during solidification of a near eutectic Al-Cu | Coautor: Gonzalez-Rivera, C, Morua-Ramirez, M, Ramirez-Argaez, M, Juarez-Hernandez, A, et al. | 2014 | REVISTA MEXICANA DE FISICA | WoS-id: 000335719400001
| 1 | 0 |
| 28 | Determinación de la cinética de crecimiento de grano durante la solidificación de una aleación eutéctica Al-Cu | Coautor: González-Rivera C., Morua-RamÃrez M., RamÃrez-Argaez M., Juárez-Hernández A., et al. | 2014 | REVISTA MEXICANA DE FISICA | Scopus-id: 2-s2.0-84897552124
| 0 | 1 |
| 29 | Thermal and Kinetic Analysis of the solidification of a near eutectic Al-Cu Alloy | Coautor y autor de correspondencia: Gonzalez-Rivera C., Morua M., Ramirez-Argaez M. | 2014 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-84911463351
| 0 | 0 |
| 30 | Mathematical Model of the melting of DRI in a slag melt | 2ᵒ autor y autor de correspondencia: González-Rivera C., Ramírez-Argáez M.A. | 2014 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-84911467633
| 0 | 1 |
| 31 | Mathematical modeling of the fluid flow in a mixing device for melting/dissolving solid particles in a liquid alloy | Coautor: González-Rivera C., Delgado-Álvarez J.A., Perea-Zurita J.G., Antonio-Morales A., et al. | 2014 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-84911472387
| 0 | 0 |
| 32 | Mathematical modeling of aluminum degassing by the impeller injector technique validated by a physical modeling | Coautor: Gonzalez-Rivera C., Hernández-Hernández M., Cruz-Mendez W.F., Ramírez-Argáez M.A. | 2014 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-84911496102
| 0 | 2 |
| 33 | Mathematical modeling of fluid flow in a water physical model of an aluminum degassing ladle equipped with an impeller-injector | Coautor: Rivera C.G., Gómez E.R., Zenit R., Trápaga G., et al. | 2013 | METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE | WoS-id: 000316021100021
Scopus-id: 2-s2.0-84878622418
| 25 | 28 |
| 34 | Bismuth segregation and crack formation on a free lead yellow brass tap | Coautor: González-Rivera C., Martinez-Hernandez M., Juarez-Hernandez A., Hernandez-Rodriguez, MAL | 2013 | ENGINEERING FAILURE ANALYSIS | WoS-id: 000316239700006
Scopus-id: 2-s2.0-84869137870
| 8 | 11 |
| 35 | Physical Modeling of Fluid Flow in Ladles of Aluminum Equipped with Impeller and Gas Purging For Degassing | Coautor: Rivera, CG, Gomez, ER, Zenit, R, Trapaga, G, et al. | 2013 | METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE | WoS-id: 000321669900023
Scopus-id: 2-s2.0-84880315078
| 18 | 18 |
| 36 | Solidification kinetics of a near eutectic Al-Si alloy, unmodified and modified with Sr | Coautor: Gonzalez-Rivera C., Aparicio R., Barrera G., Trapaga G., et al. | 2013 | METALS AND MATERIALS INTERNATIONAL | WoS-id: 000322373200010
Scopus-id: 2-s2.0-84879899960
| 15 | 17 |
| 37 | Newton thermal analysis of unmodified and strontium modified Al-Si alloys | 2ᵒ autor: Gonzalez-Rivera, C, Aparicio, R, Ramirez-Argaez, M, Barrera, G, et al. | 2013 | KOVOVE MATERIALY-METALLIC MATERIALS | WoS-id: 000329474500001
Scopus-id: 2-s2.0-84887249817
| 1 | 2 |
| 38 | Alkyne-Azide Cycloaddition Catalyzed by Fe-Cu Nanoparticles | Coautor: Gonzalez, C, Garcia-Munoz, A, Gonzalez, J, Trujillo-Reyes, J, et al. | 2012 | LETTERS IN ORGANIC CHEMISTRY | WoS-id: 000300637500002
Scopus-id: 2-s2.0-84860549230
| 4 | 6 |
| 39 | Novel Degasification Design for Aluminum Using an Impeller Degasification Water Physical Model | Coautor: González-Rivera C., Camacho-Martnez J.L., Ramírez-Argáez M.A., Juárez-Hernández A., et al. | 2012 | MATERIALS AND MANUFACTURING PROCESSES | WoS-id: 000303610900013
Scopus-id: 2-s2.0-84859951162
| 19 | 18 |
| 40 | Mathematical modeling of fluid flow in aluminum ladles for degasification with impeller - Injector | 2ᵒ autor: González-Rivera C., Ramos-Gómez E., Ramírez-Argáez M.A. | 2012 | AIP Conference Proceedings | WoS-id: 000310698100041
Scopus-id: 2-s2.0-84883096676
| 0 | 0 |
| 41 | Mathematical modeling of a gas jet impinging on a two phase bath | Coautor y autor de correspondencia: González-Rivera C., Delgado-Álvárez J., Ramírez-Argáez M.A. | 2012 | AIP Conference Proceedings | WoS-id: 000310698100042
Scopus-id: 2-s2.0-84883102298
| 1 | 1 |
| 42 | Numerical processing of cooling curves to obtain growth parameters during eutectic solidification | Coautor: Gonzalez-Rivera C., Morua M., Peña E., Aparicio R., et al. | 2012 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-84861121441
| 0 | 1 |
| 43 | Effect of Both Radial Position and Number of Porous Plugs on Chemical and Thermal Mixing in an Industrial Ladle Involving Two Phase Flow | Coautor: González C., Maldonado-Parra F.D., Ramírez-Argáez M.A., Conejo A.N. | 2011 | ISIJ INTERNATIONAL | WoS-id: 000293108500013
Scopus-id: 2-s2.0-80054058509
| 33 | 38 |
| 44 | SYNTHESIS OF (TETRAHYDROFURANYL)METHYL-1,2,3-TRIAZOLES THROUGH ALKYNE-AZIDE CYCLOADDITION CATALYZED BY A DITHIOIC ACID COPPER(I) COMPLEX | Coautor: Gonzalez, C, Velasco, BE, Fuentes, A, Corona, D, et al. | 2011 | SYNTHETIC COMMUNICATIONS | WoS-id: 000297975900001
Scopus-id: 2-s2.0-79960624863
| 7 | 7 |
| 45 | The Use of Glucose as Alternative Reducing Agent in Copper-Catalyzed Alkyne-Azide Cycloaddition | Coautor: Gonzalez, C, Garcia, MA, Rios, ZG, Gonzalez, J, et al. | 2011 | LETTERS IN ORGANIC CHEMISTRY | WoS-id: 000299572800004
Scopus-id: 2-s2.0-84857366850
| 18 | 19 |
| 46 | Fourier thermal analysis of eutectic Al-Si alloy with different Sr content | Coautor: Gonzalez C., Aparicio R., Barrera G., Trapaga G. | 2010 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-79952394456
| 0 | 0 |
| 47 | Physical modeling of gas jet-liquid free surface in steelmaking processes | Coautor: González-Rivera C., Solórzano-López J., Zenit R., Ramírez-Argáez M.A. | 2010 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-80051497844
| 0 | 0 |
| 48 | On the solidification and feeding of a ductile iron casting | Coautor y autor de correspondencia: González-Rivera C., Ramos Gómez E.A., Ramírez-Argáez M.A. | 2010 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-80051529325
| 0 | 0 |
| 49 | Fourier Thermal Analysis of the Eutectic Formed in Pb-Sn Alloys | Coautor: González-Rivera C., Cruz H., Ramírez-Argaez M., Juarez A., et al. | 2009 | JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | WoS-id: 000266038900016
Scopus-id: 2-s2.0-67349262479
| 1 | 1 |
| 50 | Mathematical Modeling of High Intensity Electric Arcs Burning in Different Atmospheres | 2ᵒ autor: González-Rivera C., Ramírez-Argáez M.A., Trápaga G. | 2009 | ISIJ INTERNATIONAL | WoS-id: 000267402900006
Scopus-id: 2-s2.0-69549118611
| 12 | 12 |
| 51 | Failure analysis for degradation of a polyethylene knee prosthesis component | Coautor: González-Rivera C., Diabb J., Juarez-Hernandez A., Reyes A., et al. | 2009 | ENGINEERING FAILURE ANALYSIS | WoS-id: 000272673600050
Scopus-id: 2-s2.0-64649088046
| 8 | 8 |
| 52 | Effect of the presence of SiCp on dendritic coherency of Al-Si-based alloys during solidification | Coautor: Gonzalez-Rivera, C, Cabrera, O, Ramirez, M, Campillo, B | 2008 | MATERIALS AND MANUFACTURING PROCESSES | WoS-id: 000252351800008
Scopus-id: 2-s2.0-37249022983
| 12 | 13 |
| 53 | On the fluid flow and mixing phenomena in ladles equipped with impeller and gas purging for degassing of Al-based alloys | Coautor y autor de correspondencia: González-Rivera C., Ramírez-Argáez M., Contreras-Bustos F. | 2007 | Materials Science Forum | Scopus-id: 2-s2.0-38349167894
| 0 | 0 |
| 54 | Macro-micro modeling and simulation of solidification kinetics of Pb-Sn alloys | Coautor: González-Rivera C., López L., Cruz H., Campillo B. | 2006 | Materials Science Forum | Scopus-id: 2-s2.0-35748949300
| 0 | 0 |
| 55 | The effect of hot rolling on room temperature ductility of a NiAl intermetallic compound | Coautor: Gonzalez-Rivera C., Garcia-Galan S., Aramburo-Perez G., Herrera R., et al. | 2006 | Materials Science Forum | Scopus-id: 2-s2.0-35748955538
| 0 | 0 |
| 56 | Use of Newton thermal analysis for the prediction of the amount of microconstituents formed during solidification | Coautor: Gonzalez-Rivera C., Cruz H., Lopez L., Campillo B. | 2006 | Materials Science Forum | Scopus-id: 2-s2.0-35748957520
| 0 | 1 |
| 57 | Newton thermal analysis of gray and nodular eutectic cast iron | Coautor: González-Rivera C., Chavez M.R., Amaro A., Flores C., et al. | 2006 | Materials Science Forum | Scopus-id: 2-s2.0-35748965605
| 0 | 8 |
| 58 | Fourier thermal analysis of the solidification kinetics in A356/SiC p cast composites | 2ᵒ autor: Gonzalez C., Baez J.C., Chavez M.R., Castro M., et al. | 2004 | JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | WoS-id: 000225845500084
Scopus-id: 2-s2.0-9444240332
| 15 | 19 |
| 59 | The effect of Cu-macroalloying on ß-NiAl intermetallic compound obtained by mechanical alloying | Coautor: González-Rivera C., García-Galán S., Arámburo-Pérez G., Juárez-Islas J. | 2003 | JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | WoS-id: 000187510100104
Scopus-id: 2-s2.0-0242523647
| 3 | 4 |
| 60 | Quantification of the SiCp content in molten Al-Si/SiC p composites by computer aided thermal analysis | 1ᵉʳ autor: Gonzalez-Rivera C., Baez J., Chavez R., García A., et al. | 2003 | JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | WoS-id: 000187510100158
Scopus-id: 2-s2.0-0242439612
| 6 | 7 |
| 61 | Effect of SiCp content on cooling curve characteristics and solidification kinetics of Al-Si/SiCp cast composites | 1ᵉʳ autor: Gonzalez-Rivera C., Baez J., Chavez R., Alvarez O., et al. | 2003 | INT J CAST METAL RES | WoS-id: 000189306200003
Scopus-id: 2-s2.0-1642351676
| 8 | 10 |
| 62 | Microstructural characterization of (Ni, Cu) Al intermetallic compounds rapidly solidified | 2ᵒ autor: Gonzalez-Rivera C., Garcia-Galan S., Alvarez-Fregoso O., Juarez-Islas J.A. | 2002 | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | WoS-id: 000176762600099
Scopus-id: 2-s2.0-0036601864
| 1 | 1 |
| 63 | Evaluation of the mechanical properties and corrosion behaviour of ultra-clean steels | Coautor: Gonzalez-Rivera C., Mendoza R., Alanis M., Huante J., et al. | 2000 | JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | WoS-id: 000086418100033
Scopus-id: 2-s2.0-0033878519
| 8 | 7 |
| 64 | Processing of ultra low carbon steels with mechanical properties adequate for automotive applications in the as-annealed condition | Coautor: Gonzalez-Rivera C., Mendoza R., Huante J., Alanis M., et al. | 2000 | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | Scopus-id: 2-s2.0-0033906544
| 0 | 37 |
| 65 | On the local microstructural characteristics observed in sand cast Al-Si alloys | 1ᵉʳ autor: González-Rivera C., Campillo B., Castro M., Herrera M., et al. | 2000 | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | Scopus-id: 2-s2.0-0034140598
| 0 | 17 |
| 66 | Effect of heat transfer on local solidification kinetics of eutectic Al-Si cast alloy | 1ᵉʳ autor: González-Rivera C., Cruz M. H., García H. A., Juarez-Islas J.A. | 1999 | JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | WoS-id: 000079227100013
Scopus-id: 2-s2.0-0039385497
| 9 | 10 |
| 67 | Thermal analysis of compacted graphite cast irons containing various levels of Mg and S | Coautor: González C., Rodríguez S., Castro M., Herrera M., et al. | 1999 | INT J CAST METAL RES | WoS-id: 000082714700022
Scopus-id: 2-s2.0-0346457508
| 2 | 2 |
| 68 | Slab cracking after continuous casting of API 5L X-70 grade steel for pipeline sour gas application | Coautor: Gonzalez-Rivera C., Mendoza R., Huante J., Alanis M., et al. | 1999 | IRONMAKING & STEELMAKING | Scopus-id: 2-s2.0-0032684169
| 0 | 13 |
ID's SCOPUS 
ORCID's 