| 1 | Effect of Ag and Cu Content on the Properties of Zn-Ag-Cu-0.05Mg Alloys | Coautor: Ramírez-Argáez M., Jara-Chávez G., Amaro-Villeda A., Campillo-Illanes B., et al. | 2024 | METALS | WoS-id: 001277201000001
Scopus-id: 2-s2.0-85199621583
| 1 | 1 |
| 2 | Thermal Mixing Analysis in a Ladle Utilizing Physical and Numerical Modeling through Planar Laser-induced Fluorescence (PLIF) Technique | Coautor: Ramírez-Argáez M.A., Amaro-Villeda A., Dutta A., Guevara-Castillo M., et al. | 2024 | ISIJ INTERNATIONAL | WoS-id: 001333367700003
Scopus-id: 2-s2.0-85204485629
| 0 | 0 |
| 3 | Effect of the Injection Position on Mixing Time in a Centric Gas-stirred Ladle Water Model Assisted by a Systematic CFD Study | Coautor: Ramírez-Argáez M.A., Villarreal-Medina R., Jardón-Pérez L.E., Amaro-Villeda A.M., et al. | 2024 | ISIJ INTERNATIONAL | Scopus-id: 2-s2.0-85212540873
| 0 | 0 |
| 4 | Power characteristics and mass transfer of rotor injectors in a water physical model of an aluminum degassing ladle | Coautor: Ramirez-Argaez, Marco Aurelio, Posadas-Navarro, David Israel, Gonzalez-Rivera, Carlos, Ascanio, Gabriel | 2023 | CHEMICAL ENGINEERING RESEARCH & DESIGN | WoS-id: 000925423800001
Scopus-id: 2-s2.0-85147222803
| 2 | 3 |
| 5 | Analysis of the Effect of Gas Injection System on the Heating Rate of a Gas Stirred Steel Ladle Assisted by Physical Modeling and PIV-PLIF Measurements | Coautor: Ramírez-Argáez M.A., Jardón-Pérez L.E., Conejo A.N., Amaro-Villeda A.M., et al. | 2023 | ISIJ INTERNATIONAL | WoS-id: 000947942600010
Scopus-id: 2-s2.0-85150410305
| 5 | 5 |
| 6 | Heat Transfer Mechanisms in Arcs of Various Gases at Atmospheric Pressure | Coautor: Ramirez-Argaez, Marco A., Villarreal-Medina, Rodrigo, Murphy, Anthony B., Mendez, Patricio F. | 2023 | PLASMA CHEMISTRY AND PLASMA PROCESSING | WoS-id: 000976764400001
Scopus-id: 2-s2.0-85153367854
| 5 | 6 |
| 7 | 3D CFD Model of Ladle Heat Transfer With Gas Injection | Coautor: Ramirez-Argaez, Marco. A. A., Niu, Kaijun, Feng, Weihang, Conejo, Alberto. N. N., et al. | 2023 | METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE | WoS-id: 000997429700001
Scopus-id: 2-s2.0-85160268592
| 5 | 6 |
| 8 | Optimizing the Performance of a Dual-Injection Gas-Stirred Ladle Using Physical Modeling | 2ᵒ autor: Ramirez-Argáez M.A., González-Rivera C., Amaro-Villeda A., Trápaga-Martínez G., et al. | 2022 | STEEL RESEARCH INTERNATIONAL | WoS-id: 000760099900001
Scopus-id: 2-s2.0-85125086752
| 6 | 6 |
| 9 | Mathematical modelling of the liquid/liquid mass transfer behaviour in gas stirred ladles | Coautor: Ramirez-Argaez, Marco A., Zhang, Han, Conejo, Alberto N., Dutta, Abhishek, et al. | 2022 | IRONMAKING & STEELMAKING | WoS-id: 000805243700001
Scopus-id: 2-s2.0-85131410733
| 6 | 6 |
| 10 | Numerical Study of Electrostatic Desalting: A Detailed Parametric Study | 1ᵉʳ autor: Ramirez-Argaez M.A., Abreú-López D., Gracia-Fadrique J., Dutta A. | 2022 | Processes | WoS-id: 000873499500001
Scopus-id: 2-s2.0-85140900995
| 2 | 2 |
| 11 | Generalized representation of arc shape, arc column characteristics and arc-weld pool interactions for DC electric arcs burning in monoatomic gases | Coautor: Ramirez-Argaez, Marco A., Delgado-Alvarez, Alfredo, Mendez, Patricio F., Murphy, Anthony B. | 2021 | JOURNAL OF PHYSICS D-APPLIED PHYSICS | WoS-id: 000589113700001
Scopus-id: 2-s2.0-85097149386
| 4 | 4 |
| 12 | Special issue on ?process modeling in pyrometallurgical engineering? | 2ᵒ autor: Ramirez-Argaez, Marco A., Saxen, Henrik, Conejo, Alberto N., Dutta, Abhishek | 2021 | Processes | WoS-id: 000623145800001
Scopus-id: 2-s2.0-85100084577
| 1 | 1 |
| 13 | Dominant Heat Transfer Mechanisms in the GTAW Plasma Arc Column | Coautor: Ramirez-Argaez, Marco A., Velazquez-Sanchez, Alberto, Delgado-Alvarez, Alfredo, Mendez, Patricio F., et al. | 2021 | PLASMA CHEMISTRY AND PLASMA PROCESSING | WoS-id: 000666814600001
Scopus-id: 2-s2.0-85108809266
| 8 | 8 |
| 14 | Numerical Study of Electrostatic Desalting Process Based on Droplet Collision Time | 1ᵉʳ autor: Ramirez-Argaez, Marco A., Abreu-Lopez, Diego, Gracia-Fadrique, Jesus, Dutta, Abhishek | 2021 | Processes | WoS-id: 000676990200001
Scopus-id: 2-s2.0-85111279852
| 5 | 5 |
| 15 | Experimental Study of Mass Transfer Mechanisms for Solute Mixing in a Gas-Stirred Ladle Using the Particle Image Velocimetry and Planar Laser-Induced Fluorescence Techniques | Coautor: Ramirez-Argaez, Marco A., Jardon-Perez, Luis E., Gonzalez-Rivera, Carlos, Trapaga-Martinez, Gerardo, et al. | 2021 | STEEL RESEARCH INTERNATIONAL | WoS-id: 000678838900001
Scopus-id: 2-s2.0-85111159601
| 9 | 9 |
| 16 | CFD study on the effect of the oxygen lance inclination angle on the decarburization kinetics of liquid steel in the EAF | 1ᵉʳ autor: Ramirez-Argaez, Marco A., Conejo, Alberto N. | 2021 | METALLURGICAL RESEARCH & TECHNOLOGY | WoS-id: 000702505000001
Scopus-id: 2-s2.0-85116411874
| 3 | 6 |
| 17 | Determination of the latent heat of fusion and solid fraction evolution of metals and alloys by an improved cooling curve analysis method | Coautor: Ramirez-Argaez, Marco A., Gonzalez-Rivera, Carlos, Harrup, Anthony, Aguilar, Carla, et al. | 2020 | Journal Of Thermal Analysis And Calorimetry | WoS-id: 000493684300019
Scopus-id: 2-s2.0-85074810920
| 2 | 2 |
| 18 | Utilization of the Planar Laser-Induced Fluorescence Technique (PLIF) to Measure Temperature Fields in a Gas-Stirred Ladle | Coautor: Ramírez-Argáez M.A., Jardón-Pérez L.E., Amaro-Villeda A.M., Trápaga-Martínez G., et al. | 2020 | METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE | WoS-id: 000563166400002
Scopus-id: 2-s2.0-85089864402
| 11 | 12 |
| 19 | Numerical modeling of equal and differentiated gas injection in ladles: Effect on mixing time and slag eye | Coautor: Ramirez-Argaez M.A., Jardón-Pérez L.E., González-Rivera C., Dutta A. | 2020 | Processes | WoS-id: 000564810300001
Scopus-id: 2-s2.0-85089843033
| 16 | 19 |
| 20 | Analysis of Temperature Losses of the Liquid Steel in a Ladle Furnace During Desulfurization Stage | Coautor: Ramirez-Argaez, M. A., Farrera-Buenrostro, J. E., Hernandez-Bocanegra, C. A., Ramos-Banderas, J. A., et al. | 2019 | TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | WoS-id: 000462035400007
Scopus-id: 2-s2.0-85060128770
| 15 | 15 |
| 21 | A Novel Multiphase Methodology Simulating Three Phase Flows in a Steel Ladle | 1ᵉʳ autor: Ramirez-Argaez, Marco A., Dutta, Abhishek, Amaro-Villeda, A., Gonzalez-Rivera, C., et al. | 2019 | Processes | WoS-id: 000464443100002
Scopus-id: 2-s2.0-85066496463
| 9 | 10 |
| 22 | Experimental measurements of bubble size distributions in a water model and its influence on the aluminum kinetics degassing | Coautor: Aurelio Ramirez-Argaez, Marco, Mancilla E., Cruz-Méndez W., González-Rivera C., et al. | 2019 | CANADIAN JOURNAL OF CHEMICAL ENGINEERING | WoS-id: 000468474400049
Scopus-id: 2-s2.0-85061804160
| 9 | 10 |
| 23 | Effect of differentiated injection ratio, gas flow rate, and slag thickness on mixing time and open eye area in gas-stirred ladle assisted by physical modeling | Coautor: Ramírez-Argáez M.A., Jardón-Pérez L.E., González-Morales D.R., Trápaga G., et al. | 2019 | METALS | WoS-id: 000478818700073
Scopus-id: 2-s2.0-85066740616
| 18 | 18 |
| 24 | Dimensionless representation of the column characteristics and weld pool interactions for a DC argon arc | Coautor y autor de correspondencia: Ramirez-Argaez, Marco A., Delgado-Alvarez, Alfredo, Mendez, Patricio F. | 2019 | SCIENCE AND TECHNOLOGY OF WELDING AND JOINING | WoS-id: 000478821600006
Scopus-id: 2-s2.0-85062444089
| 10 | 8 |
| 25 | Introducing the Planar Laser-Induced Fluorescence Technique (PLIF) to Measure Mixing Time in Gas-Stirred Ladles | Coautor: Ramirez-Argaez, Marco A., Jardon-Perez, Luis E., Amaro-Villeda, Adrian, Gonzalez-Rivera, Carlos, et al. | 2019 | METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE | WoS-id: 000486025000006
Scopus-id: 2-s2.0-85066762087
| 20 | 23 |
| 26 | Melting Rate of Spherical Metallic Particles in Its Own Melt: Effect of Particle Temperature, Bath Temperature, Particle Size and Stirring Conditions | 2ᵒ autor: Ramirez-Argaez, M. A., Jardon-Perez, L. E., Conejo, A. N. | 2019 | TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | WoS-id: 000490085200013
Scopus-id: 2-s2.0-85065411018
| 2 | 4 |
| 27 | Optimizing gas stirred ladles by physical modeling and PIV measurements | Coautor: Ramírez-Argáez M.A., Jardón Pérez L.E., Amaro-Villeda A., Conejo A.N., et al. | 2018 | MATERIALS AND MANUFACTURING PROCESSES | WoS-id: 000425442900012
Scopus-id: 2-s2.0-85034263258
| 26 | 26 |
| 28 | Numerical Modeling of Liquid-Liquid Mass Transfer and the Influence of Mixing in Gas-Stirred Ladles | 2ᵒ autor: Ramirez-Argaez, Marco A., Hoang, Quynh N., Conejo, Alberto N., Blanpain, Bart, et al. | 2018 | JOM | WoS-id: 000445161500029
Scopus-id: 2-s2.0-85052146288
| 23 | 27 |
| 29 | Mass Transfer Study of a Batch Aluminum Degassing Ladle with Multiple Designs of Rotating Impellers | Coautor: Ramírez-Argáez M.A., Abreu-López D., Dutta A., Camacho-Martínez J.L., et al. | 2018 | JOM | WoS-id: 000451432400022
Scopus-id: 2-s2.0-85053898644
| 14 | 16 |
| 30 | Comparison of the hydrodynamic performance of rotor-injector devices in a water physical model of an aluminum degassing ladle | Coautor: Ramírez-Argáez, M.A., Mancilla, E., Cruz-Méndez, W., Garduño, I.E., et al. | 2017 | CHEMICAL ENGINEERING RESEARCH & DESIGN | WoS-id: 000394397200016
Scopus-id: 2-s2.0-85008882782
| 25 | 28 |
| 31 | Effect of the Impeller Design on Degasification Kinetics Using the Impeller Injector Technique Assisted by Mathematical Modeling | Coautor: Ramírez-Argáez M.A., Abreu-López D., Amaro-Villeda A., Acosta-González F.A., et al. | 2017 | METALS | WoS-id: 000404051600026
Scopus-id: 2-s2.0-85018478496
| 17 | 21 |
| 32 | Modeling of metal-slag mass and momentum exchanges in gas-stirred ladles | 1ᵉʳ autor: Ramirez-Argaez, Marco, Gonzalez-Rivera, Carlos | 2017 | Minerals Metals & Materials Series | WoS-id: 000405307700076
Scopus-id: 2-s2.0-85042431466
| 2 | 2 |
| 33 | Design of a rotor for aluminum degassing assisted by physical and mathematical modeling | 1ᵉʳ autor: Ramirez-Argaez, M., Abreu Lopez, D., Gonzalez Rivera, C. | 2017 | Mrs Advances | WoS-id: 000427708700001
Scopus-id: 2-s2.0-85044214663
| 0 | 0 |
| 34 | Physical and mathematical modeling of metal-slag exchanges in gas-stirred ladles | Coautor: Ramirez-Argaez, M. A., Jardon-Perez, Luis E., Lopez-Gutierrez, A., Vazquez, Alfredo, et al. | 2017 | Mrs Advances | WoS-id: 000427708700009
Scopus-id: 2-s2.0-85044224674
| 2 | 2 |
| 35 | Impeller design assisted by physical modeling and pilot plant trials | Coautor: Ramirez-Argaez, M. A., Hernandez-Hernandez, M., Camacho-Martinez, J. L., Gonzalez-Rivera, C. | 2016 | JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | WoS-id: 000379559200001
Scopus-id: 2-s2.0-84966318474
| 32 | 33 |
| 36 | Experimental and theoretical study on melting kinetics of spherical aluminum particles in liquid aluminum | 1ᵉʳ autor: Ramírez-Argaez M., Jardón E., González-Rivera C. | 2016 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-84994667673
| 0 | 0 |
| 37 | Mathematical and physical modeling of three-phase gas-stirred ladles | 2ᵒ autor: Ramírez-Argáez, M.A., López, J.A., Amaro-Villeda, A.M., González, C. | 2016 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-85008406091
| 0 | 0 |
| 38 | Effect of Process Variables on Kinetics and Gas Consumption in Rotor-Degassing Assisted by Physical and Mathematical Modeling | Coautor: RamirezArgaez, MA, HernandezHernandez, M, CruzMendez, W, GonzalezRivera, C | 2015 | MATERIALS AND MANUFACTURING PROCESSES | WoS-id: 000346828700013
Scopus-id: 2-s2.0-84919708825
| 11 | 11 |
| 39 | Mathematical Modeling of the Melting Rate of Metallic Particles in the EAF under Multiphase Flow | 1ᵉʳ autor: Ramirez-Argaez M.A., Conejo A.N., López-Cornejo M.S. | 2015 | ISIJ INTERNATIONAL | WoS-id: 000348554500009
Scopus-id: 2-s2.0-84922521451
| 16 | 18 |
| 40 | Experimental Determination of the Grain Growth Kinetics during Solidification of Eutectic Al-Ni Alloy using a Simplified Mathematical Procedure | Coautor y autor de correspondencia: Ramirez-Argaez M., Gonzalez-Rivera C., Morua M. | 2015 | AIP Conference Proceedings | WoS-id: 000355339706005
Scopus-id: 2-s2.0-84939649231
| 0 | 0 |
| 41 | Experimental and theoretical study on melting kinetics of spherical aluminum particles in liquid aluminum | 1ᵉʳ autor: Ramírez-Argáez M., Jardón E., Conejo A.N., González-Rivera C. | 2015 | AIP Conference Proceedings | WoS-id: 000355339706032
Scopus-id: 2-s2.0-84939648476
| 0 | 0 |
| 42 | Mathematical Modeling of the Melting of Sponge Iron in a Bath of Non-reactive Molten Slag | Coautor: Ramirez-Argaez M.A., Pineda-Martínez E., Hernández-Bocanegra C.A., Conejo A.N. | 2015 | ISIJ INTERNATIONAL | WoS-id: 000362154800015
Scopus-id: 2-s2.0-84943157803
| 10 | 13 |
| 43 | Effect of slag properties on mixing phenomena in gas-stirred ladles by physical modeling | 2ᵒ autor: Ramirez-Argaez M.A., Amaro-Villeda A.M., Conejo A.N. | 2014 | ISIJ INTERNATIONAL | WoS-id: 000330414700001
Scopus-id: 2-s2.0-84894227464
| 57 | 61 |
| 44 | Determination of the kinetics of grain growth during solidification of a near eutectic Al-Cu | 2ᵒ autor: Ramirez-Argaez, M, Morua-Ramirez, M, Gonzalez-Rivera, C, Juarez-Hernandez, A, et al. | 2014 | REVISTA MEXICANA DE FISICA | WoS-id: 000335719400001
| 1 | 0 |
| 45 | Determinación de la cinética de crecimiento de grano durante la solidificación de una aleación eutéctica Al-Cu | 2ᵒ autor: RamÃrez-Argaez M., Morua-RamÃrez M., González-Rivera C., Juárez-Hernández A., et al. | 2014 | REVISTA MEXICANA DE FISICA | Scopus-id: 2-s2.0-84897552124
| 0 | 1 |
| 46 | Thermal and Kinetic Analysis of the solidification of a near eutectic Al-Cu Alloy | 2ᵒ autor: Ramirez-Argaez M., Morua M., Gonzalez-Rivera C. | 2014 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-84911463351
| 0 | 0 |
| 47 | Mathematical Model of the melting of DRI in a slag melt | 1ᵉʳ autor: Ramírez-Argáez M.A., González-Rivera C. | 2014 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-84911467633
| 0 | 1 |
| 48 | Mathematical modeling of the fluid flow in a mixing device for melting/dissolving solid particles in a liquid alloy | Coautor: Ramírez-Argáez M.A., Delgado-Álvarez J.A., Perea-Zurita J.G., Antonio-Morales A., et al. | 2014 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-84911472387
| 0 | 0 |
| 49 | Mathematical modeling of aluminum degassing by the impeller injector technique validated by a physical modeling | Coautor: Ramírez-Argáez M.A., Hernández-Hernández M., Cruz-Mendez W.F., Gonzalez-Rivera C. | 2014 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-84911496102
| 0 | 2 |
| 50 | Mathematical modeling of fluid flow in a water physical model of an aluminum degassing ladle equipped with an impeller-injector | Coautor: Ramírez-Argáez M.A., Gómez E.R., Zenit R., Rivera C.G., et al. | 2013 | METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE | WoS-id: 000316021100021
Scopus-id: 2-s2.0-84878622418
| 25 | 28 |
| 51 | Theoretical estimation of peak arc power to increase energy efficiency in electric arc furnaces | 2ᵒ autor: Ramírez-Argáez M., Martell-Chávez F., Llamas-Terres A., Micheloud-Vernackt O. | 2013 | ISIJ INTERNATIONAL | WoS-id: 000319547200002
Scopus-id: 2-s2.0-84879240863
| 10 | 10 |
| 52 | Physical Modeling of Fluid Flow in Ladles of Aluminum Equipped with Impeller and Gas Purging For Degassing | Coautor: Ramirez-Argaez, MA, Gomez, ER, Zenit, R, Rivera, CG, et al. | 2013 | METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE | WoS-id: 000321669900023
Scopus-id: 2-s2.0-84880315078
| 18 | 18 |
| 53 | Solidification kinetics of a near eutectic Al-Si alloy, unmodified and modified with Sr | Coautor: Ramirez-Argaez M., Aparicio R., Barrera G., Trapaga G., et al. | 2013 | METALS AND MATERIALS INTERNATIONAL | WoS-id: 000322373200010
Scopus-id: 2-s2.0-84879899960
| 15 | 17 |
| 54 | Newton thermal analysis of unmodified and strontium modified Al-Si alloys | Coautor: Ramirez-Argaez, M, Aparicio, R, Gonzalez-Rivera, C, Barrera, G, et al. | 2013 | KOVOVE MATERIALY-METALLIC MATERIALS | WoS-id: 000329474500001
Scopus-id: 2-s2.0-84887249817
| 1 | 2 |
| 55 | On the characterization of eutectic grain growth during solidification | 2ᵒ autor: Ramirez-Argaez M., Morua M., Gonzalez-Rivera C C. | 2013 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-84880855362
| 0 | 1 |
| 56 | Study of aluminum degasification with impeller-injector assisted by physical modeling | Coautor y autor de correspondencia: Ramírez-Argáez M.A., Hernández-Hernández M., Ramos-Gómez E.A. | 2013 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-84880901176
| 0 | 0 |
| 57 | Novel Degasification Design for Aluminum Using an Impeller Degasification Water Physical Model | 2ᵒ autor: Ramírez-Argáez M.A., Camacho-Martnez J.L., Juárez-Hernández A., González-Rivera C., et al. | 2012 | MATERIALS AND MANUFACTURING PROCESSES | WoS-id: 000303610900013
Scopus-id: 2-s2.0-84859951162
| 19 | 18 |
| 58 | Effect of Foamy Slag Height on Hot Spots Formation inside the Electric Arc Furnace Based on a Radiation Model | Coautor y autor de correspondencia: Ramirez-Argaez M.A., Sanchez, JLG, Conejo A.N. | 2012 | ISIJ INTERNATIONAL | WoS-id: 000304516800009
Scopus-id: 2-s2.0-84863090747
| 20 | 25 |
| 59 | Mathematical modeling of fluid flow in aluminum ladles for degasification with impeller - Injector | Coautor y autor de correspondencia: Ramírez-Argáez M.A., Ramos-Gómez E., González-Rivera C. | 2012 | AIP Conference Proceedings | WoS-id: 000310698100041
Scopus-id: 2-s2.0-84883096676
| 0 | 0 |
| 60 | Mathematical modeling of a gas jet impinging on a two phase bath | 2ᵒ autor: Ramírez-Argáez M.A., Delgado-Álvárez J., González-Rivera C. | 2012 | AIP Conference Proceedings | WoS-id: 000310698100042
Scopus-id: 2-s2.0-84883102298
| 1 | 1 |
| 61 | Numerical processing of cooling curves to obtain growth parameters during eutectic solidification | Coautor: Ramirez-Argaez M., Morua M., Peña E., Aparicio R., et al. | 2012 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-84861121441
| 0 | 1 |
| 62 | Experimental study on mixing in gas-stirred ladles with and without the slag phase through a water physical model | Coautor y autor de correspondencia: Ramírez-Argáez M.A., Amaro-Villeda A.M., González Bello J.A. | 2012 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-84861181130
| 0 | 2 |
| 63 | Mathematical and physical simulation of the interaction between a gas jet and a liquid free surface | Coautor y autor de correspondencia: Ramirez-Argaez, MA, Solorzano-Lopez, J, Zenit, R | 2011 | APPLIED MATHEMATICAL MODELLING | WoS-id: 000292176200025
Scopus-id: 2-s2.0-79957755757
| 44 | 54 |
| 64 | Effect of Both Radial Position and Number of Porous Plugs on Chemical and Thermal Mixing in an Industrial Ladle Involving Two Phase Flow | 2ᵒ autor: Ramírez-Argáez M.A., Maldonado-Parra F.D., Conejo A.N., González C. | 2011 | ISIJ INTERNATIONAL | WoS-id: 000293108500013
Scopus-id: 2-s2.0-80054058509
| 33 | 38 |
| 65 | Effect of Arc Length on Fluid Flow and Mixing Phenomena in AC Electric Arc Furnaces | 2ᵒ autor: Ramírez-Argáez M.A., Gonzalez, OJP, Conejo A.N. | 2010 | ISIJ INTERNATIONAL | WoS-id: 000274032800001
Scopus-id: 2-s2.0-77949976302
| 22 | 23 |
| 66 | Mathematical Modeling of the Melting Rate of Metallic Particles in the Electric Arc Furnace | 2ᵒ autor: Ramírez-Argáez M.A., Gonzalez, OJP, Conejo A.N. | 2010 | ISIJ INTERNATIONAL | WoS-id: 000274032800002
Scopus-id: 2-s2.0-77949994799
| 18 | 24 |
| 67 | Physical Modelling of an Aluminium Degassing Operation with Rotating ImpellersA Comparative Hydrodynamic Analysis | 2ᵒ autor: Ramírez-Argáez M.A., Camacho-Martínez J.L., Zenit-Camacho R., Juárez-Hernández A., et al. | 2010 | MATERIALS AND MANUFACTURING PROCESSES | WoS-id: 000280678300009
Scopus-id: 2-s2.0-77955504273
| 25 | 26 |
| 68 | Physical modeling of the impingement of an air jet on a water surface | 2ᵒ autor: Ramirez-Argaez, MA, Solorzano-Lopez, J, Zenit, R | 2010 | REVISTA DE METALURGIA | WoS-id: 000288472600004
Scopus-id: 2-s2.0-79251559439
| 1 | 1 |
| 69 | Mathematical modeling of impingement of an air jet in a liquid bath | Coautor y autor de correspondencia: Ramírez-Argáez M.A., Solórzano-López J., Zenit R. | 2010 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-79952436705
| 0 | 0 |
| 70 | Physical modeling of gas jet-liquid free surface in steelmaking processes | Coautor: Ramírez-Argáez M.A., Solórzano-López J., Zenit R., González-Rivera C. | 2010 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-80051497844
| 0 | 0 |
| 71 | On the solidification and feeding of a ductile iron casting | 2ᵒ autor: Ramírez-Argáez M.A., Ramos Gómez E.A., González-Rivera C. | 2010 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-80051529325
| 0 | 0 |
| 72 | Influence of the top slag layer on the flow dynamics in AC-electric arc furnaces | 1ᵉʳ autor: Ramírez-Argáez M.A., Conejo A.N., Guzmán Y.I.C., Trápaga G. | 2010 | International Journal Of Engineering Systems Modelling And Simulation | Scopus-id: 2-s2.0-84922485499
| 0 | 2 |
| 73 | Power Delivery from the Arc in AC Electric Arc Furnaces with Different Gas Atmospheres | 2ᵒ autor: Ramírez-Argaez M.A., Sanchez, JLG, Conejo A.N. | 2009 | STEEL RESEARCH INTERNATIONAL | WoS-id: 000264542600003
Scopus-id: 2-s2.0-62549161793
| 21 | 22 |
| 74 | Fourier Thermal Analysis of the Eutectic Formed in Pb-Sn Alloys | 2ᵒ autor: Ramírez-Argaez M., Cruz H., Juarez A., Garcia A., et al. | 2009 | JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | WoS-id: 000266038900016
Scopus-id: 2-s2.0-67349262479
| 1 | 1 |
| 75 | Mathematical Modeling of High Intensity Electric Arcs Burning in Different Atmospheres | 1ᵉʳ autor: Ramírez-Argáez M.A., González-Rivera C., Trápaga G. | 2009 | ISIJ INTERNATIONAL | WoS-id: 000267402900006
Scopus-id: 2-s2.0-69549118611
| 12 | 12 |
| 76 | Numerical simulation of fluid flow and mixing in gas-stirred ladles | 1ᵉʳ autor y autor de correspondencia: Ramirez-Argaez, MA | 2008 | MATERIALS AND MANUFACTURING PROCESSES | WoS-id: 000252351800010
Scopus-id: 2-s2.0-37249004854
| 16 | 21 |
| 77 | Melting behavior of simulated DRI in liquid steel | Coautor: Ramírez-Argaez M.A., Gonzalez, OJP, Guzman, YIC, Conejo A.N. | 2008 | ARCHIVES OF METALLURGY AND MATERIALS | WoS-id: 000257173900007
Scopus-id: 2-s2.0-58149232659
| 3 | 3 |
| 78 | Mathematical modeling of pottery production in different industrial furnaces | 1ᵉʳ autor: Argaez, MAR, Huacuz, SL, Trapaga, G | 2008 | JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | WoS-id: 000259142500003
Scopus-id: 2-s2.0-51549084258
| 1 | 0 |
| 79 | On the fluid flow and mixing phenomena in ladles equipped with impeller and gas purging for degassing of Al-based alloys | 1ᵉʳ autor: Ramírez-Argáez M., Contreras-Bustos F., González-Rivera C. | 2007 | Materials Science Forum | Scopus-id: 2-s2.0-38349167894
| 0 | 0 |
| 80 | Mathematical modelling of mixing in gas stirred ladles [Modelación matemática del mezclado en hornoscucharas agitadas con gas] | 1ᵉʳ autor: Ramírez-Argáez M.A., Tapia J., Espinoza J., Alcantar E. | 2006 | REVISTA DE METALURGIA | Scopus-id: 2-s2.0-33747480927
| 0 | 2 |
| 81 | Mathematical modeling of mixing phenomena in ladles of aluminum equipped with impeller and gas purging for degassing [Modelación matemática del mezclado en ollas (cucharas) de aluminio equipadas con la técnica de desgasificación rotor-in | 1ᵉʳ autor: Ramírez-Argáez M.A., Contreras F., González C. | 2006 | REVISTA DE METALURGIA | Scopus-id: 2-s2.0-33750372571
| 0 | 2 |
| 82 | A comparison between different numerical formulations for welding arc representations | 1ᵉʳ autor: Ramírez M.A., Trapaga G., McKelliget J. | 2004 | JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | WoS-id: 000225845800081
Scopus-id: 2-s2.0-10044294746
| 15 | 17 |
| 83 | Mathematical modeling of a direct current electric arc: Part II. Dimensionless representation of a direct current arc | 1ᵉʳ autor: Ramírez M., Trapaga G., Garduño-Esquivel J. | 2004 | METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE | Scopus-id: 2-s2.0-2342472033
| 0 | 5 |
| 84 | Mathematical modeling of a direct current electric arc: Part I. Analysis of the characteristics of a direct current arc | 1ᵉʳ autor: Ramírez M., Trapaga G. | 2004 | METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE | Scopus-id: 2-s2.0-2342614856
| 0 | 14 |
| 85 | A comparison between two different numerical formulations of welding arc simulation | 1ᵉʳ autor: Ramírez M.A., Trapaga G., McKelliget J. | 2003 | MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING | Scopus-id: 2-s2.0-0038443539
| 0 | 29 |
| 86 | Mathematical Modeling of a DC Electric Arc - Dimensionless Representation of a DC Arc | 1ᵉʳ autor: Ramírez M., Trapaga G. | 2003 | ISIJ INTERNATIONAL | Scopus-id: 2-s2.0-19244373120
| 0 | 11 |
| 87 | Order-of-magnitude scaling of the cathode region in an axisymmetric transferred electric arc | 2ᵒ autor: Ramirez M.A., Mendez P.F., Trapaga G., Eagar T.W. | 2001 | METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE | WoS-id: 000169180400018
Scopus-id: 2-s2.0-0035360851
| 15 | 15 |
| 88 | Modeling of a DC electric arc furnace - Mixing in the bath | 1ᵉʳ autor: Ramírez M., Alexis J., Trapaga G., Jönsson P., et al. | 2001 | ISIJ INTERNATIONAL | WoS-id: 000171686400010
Scopus-id: 2-s2.0-0035186248
| 24 | 29 |
| 89 | Simulation of a DC electric arc furnace for steelmaking: Study in the arc and bath regions [Simulación de un horno eléctrico de arco CC para aceración: Estudio de la región del arco y del baño metálico] | 1ᵉʳ autor: Argáez M.A.R., Martínez L.G.T. | 2001 | REVISTA DE METALURGIA | Scopus-id: 2-s2.0-0035326035
| 0 | 0 |
| 90 | Modeling of a DC Electric Arc Furnace - heat transfer from the arc | 2ᵒ autor: Ramirez M., Alexis J., Trapaga G., Jönsson P. | 2000 | ISIJ INTERNATIONAL | Scopus-id: 2-s2.0-0034507093
| 0 | 77 |
| 91 | Computer-aided cooling curve analysis applied to Co-Cr-Mo system | 2ᵒ autor: Ramirez A M.A., Escobedo Bocardo J.C., Donizak J., Kolenda Z. | 2000 | ARCH METALL | Scopus-id: 2-s2.0-0040187846
| 0 | 2 |
ID's SCOPUS 
ORCID's 